WHITE WATER LINSEED OIL CONCRETE CURING COMPOUND is a water based coating that utilizes a modified linseed oil base to form a watertight membrane on concrete surfaces.The addition of fine grind white pigments to the linseed oil film protects the curing slab from excess heat-buildup due to sunlight.
This environmentally friendly VOC compliant compound is designed to provide maximum curing to freshly-laid exterior concrete paving applications, where high sunlight reflection is desired.
- VOC compliant with maximum 350 g/l content
- White reflective surface keeps slab cooler
- Will not clog or plug spray equipment
- Ready to use
- ASTM-C 309, Type II, Class A
- AASHTO M148, Type II, Class A
WHITE WATER LINSEED OIL is suitable for use with a wide variety of concrete construction projects. It is ideal for many sizes of exterior concrete slab work, as well as other flatwork applications.
- Parking lots
- Airport runways
- Maximum protection against spalling and scaling
- Membrane forming treatment enhances slab water retention
- Densifies and hardens concrete, reducing any crazing, cracking, or checking
- Tensile and compressive strengths are improved over non-cured slabs
- Packaging stable with no hard settlement
- Highly reflective pigment protects concrete from sunlight
For newly placed concrete, apply WHITE WATER LINSEED OIL when surface water has completely disappeared from the surface. It is also recommended that application not be attempted until workmen cannot mar the surface. Temperature must be above 40° F before application. WHITE WATER LINSEED OIL may be applied with a standard hand held sprayer or power sprayer; a short napped roller is recommended for brush application. Avoid puddling during application and restrict foot traffic for at least 4 hours (12 hours preferable) after application. Additional coatings may be applied after surface has completely dried.
|Approximate||200 sq ft/gal|
275 Gallon Totes5 Gallon Pails55 Gallon Drums