RIGHT RELEASE OIL is a film forming treatment that prevents the bonding of fresh concrete mix to forms, tools, and equipment. Composed of nonstaining natural oils, RIGHT RELEASE OIL reacts with excess lime on the surface of the concrete to give a quick, clean stripping from any form work.
- Provides economical smooth surfaces
- Lengthens form life
This product meets the maximum VOC content limit (450 g/L) for form release compounds as required by the U.S. EPA Architectural Coatings Rule and the rigid specifications set forth by the Ozone Transport Commission (OTC).
For use on various types of forms (wood, steel, fiberglass, aluminum). Treat and season forms prior to each use with brush, roller or hand sprayer (maximum setting at 25-30 PSI with fan type tip). Avoid excess run-off or ponding by only applying a thin coat of RIGHT RELEASE OIL.
- FOR EXTERIOR USE ONLY
- NOT TO BE USED AS A TILT-UP BONDBREAKER
- Minimizes stripping time
- Provides a clean cast on pre-cast products
- Inhibits concrete buildup on equipment
- Can be painted over
|Plywood/Lumber||600-1000 sq ft/gal|
|Aluminum/Steel||1000-2000 sq ft/gal|
275 Gallon Totes5 Gallon Pails55 Gallon Drums