Right Bond

Commercial Liquids

Category:

RIGHT BOND is a high solids liquid bonding admixture which significantly improves adhesion, tensile, compressive and flexural strengths of cement based materials.

RIGHT BOND is used as an admixture for RIGHT SEAL, RIGHT SEAL HIGH BUILD, concrete toppings, stucco and patching materials to enhance physical properties. May be used above or below grade, interior or exterior.

  • Will not re-emulsify when exposed to moisture
  • Improves freeze thaw stability of cement based materials
  • Controls shrinkage and cracking typically associated with Portland based materials

On horizontal surfaces, remove all loose and delaminated material. Remove all grease, dirt, efflorescence, mold and curing agents. On vertical surfaces, pre-dampen with potable water to a surface saturated dry (SSD) condition.

Typical mixing ratio for most applications is 1 part RIGHT BOND to 3 parts water. Always mechanically mix prior to use.

  • Minimum of one (1) year stored in dry protected storage
  • Protect from freezing

Packaging

1 Gallon 6 Pack

5 Gallon Pails

55 Gallon Drums