ANTI-SPALL 50/50 is a half and half solution of mineral spirits and boiled linseed oil that functions as a fast drying, penetrating concrete sealer.
ANTI-SPALL 50/50 is designed to prevent the spalling and scaling of concrete, especially those structures that are exposed to the destructive effects of de-icing salts, freeze-thaw cycles, and ponding surface water. ANTI-SPALL 50/50 penetrates into the surface of concrete to seal and protect the material, extending its service life and protecting it from harsh winters.
- Will cause an amber coloration on applied surfaces
- Meets USEPA VOC regulations with a maximum 400 g/l VOC content
- Penetrates into the concrete prolonging the service life
- Prevents scaling and spalling
- Can also be used on wood structures to preserve and seal
- Ready to use
- AASHTO M-233
- ASTM D-260
- ASTM D-235
- IL D.O.T. section 1023.01 (TT-L-190D)
The appropriate time of application for the maximum penetration of the sealer is after the final cure phase; most effectively after 28 days of curing. Before application of ANTI-SPALL 50/50, clean surface debris from the concrete to be treated. Once surface is clean and dry, spray one coating of ANTI-SPALL 50/50 over the surface of the concrete; avoid pooling on the concrete surface. ANTI-SPALL 50/50 may be applied with a standard hand held sprayer or power sprayer; a short napped roller is recommended for brush application. A second application of ANTI-SPALL 50/50 is recommended and can be applied after two (2) hours. Restrict foot traffic until surface is completely dry.
- Bridge decks
- Driveways
- Sidewalks
- Garage floors
- Barrier medians
- Roadways
- Airport runways
- Parking garages
- Foundation walls
- Ready to use
- Time tested reliable technology
First application | 200 sq ft/gal |
---|---|
Second application | 600 sq ft/gal |