DESCRIPTION
Vapor Barrier – 5 Ply is a semi-rigid panel utilizing premium grade layers of fiberglass scrim combined with a fortified high-melt asphalt core. Both exterior surfaces are subsequently treated with a proprietary release liner to eliminate sticking of the panels on the pallet. It has a (WVT) rate of 0.000 grains per square foot per hour, as measured using ASTM Test method
E-96.
• Does not extrude.
• Bridges cracks when installed.
• Resists water infiltration.
• Effectively prevents excess moisture migration

SIZE INFORMATION
• 4’ x 8’ Sheets
• Nominal thickness 1/8”
• 70 lbs/100 sq. ft. approx. weight
• Color – Black with gray thread pattern.

USES:
• Separates structure from site.
• Horizontal use only.
• Excellent for slab on grade construction.
• Can be stored outside on site.
• Apply right over compacted grade.
• Monolithic panel (no up or down side).

APPLICATION:
• Contractor option – overlap or butt joint.
• Cut and form with roofer’s knife, heat for bending.
• Point and seal all edges and protrusions.
• Hydrostatic head must be addressed in design phase

TECHNICAL SERVICE
For conditions not specified, application procedures not noted,
contact: Right Pointe Company (888) 755-5700

LIMITED WARRANTY
Every reasonable effort is made to apply RIGHT POINTE COMPANY
exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, RIGHT POINTE COMPANY MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and RIGHT POINTE COMPANY shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the RIGHT POINTE COMPANY Technical Manager.