DESCRIPTION
RIGHT SHEEN 30 is a solvent based clear acrylic curing and sealing compound used on existing or new concrete. It provides a glossy wet look to concrete, resistant to salts, mild acids and UV rays.

USE AND APPLICATIONS
Apply in a uniform film using airless spray, brush, short napped roller or broom. If a second coat is desired for a higher luster, apply after the first coat has totally cured, typically, the next day.
• Driveways
• Stamped concrete
• Showroom floors
• Concrete pavement
• Exposed aggregate concrete

FEATURES AND BENEFITS
• Will not yellow
• Provides a wet look for architectural concrete
• Styrene free
• Reduces spalling
• VOC compliant
• High solids, 25% minimum
• Meets ASTM C1315, Type I, Class A

Coverage Rates

PACKAGING
• 1 gallon 6 packs
• 5 gallon pails
• 55 gallon drums

APPEARANCE
Milky white, dries water clear

RESTRICTIONS
Do not apply to frozen concrete
Do apply to new or existing concrete
Do apply a second coat for a higher luster
Do not thin or dilute

WARNING
COMBUSTIBLE MIXTURE.
AVOID DIRECT CONTACT.
PROPER VENTILATION IS NECESSARY DURING APPLICATION.
FUMES MAY IRRITATE SKIN AND EYES.
See MSDS for further information.

TECHNICAL SERVICE
For conditions not specified, application procedures not noted,
contact: Right Pointe Company (888) 755-5700

LIMITED WARRANTY
Every reasonable effort is made to apply RIGHT POINTE COMPANY
exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, RIGHT POINTE COMPANY MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and RIGHT POINTE COMPANY shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the RIGHT POINTE COMPANY Technical Manager.