RIGHT POXY FLOOR COATING is a 100% solids, two component epoxy
designed for a variety of applications and methods.

PRIMARY APPLICATIONS
• Warehouse floors
• Garage floors
• Manufacturing plants
• Hospitals

FEATURES / BENEFITS
• User friendly
• Low odor, 100% solids
• Anti-microbial
• Chemical resistant
• Low modulus
• Durable

PACKAGING
RIGHT POXY FLOOR COATING is packaged in 3 gallon and 15 gallon units

COVERAGE
Coverage will depend on application method, typically 100 to 150 square feet per gallon per coat, two coats are typically recommended

APPEARANCE
• RIGHT POXY FLOOR COATING is available in six standard colors

SHELF LIFE
Minimum of 2 year stored in dry protected storage.

DIRECTIONS FOR USE:
SURFACE PREP
Proper surface prep for all horizontal repair materials is critical.
Surface must be clean from dirt, grease, oils and other contaminants. Loose concrete must be removed until a sound concrete substrate
is exposed.

MIXING
Pre-mix Part A and Part B, then combine 2 parts by volume of Part A with 1 Part by volume of Part B. Thoroughly mix using a
slow speed drill until blended. Do not mix more than can be applied within the pot life, 15 to 25 minutes.

APPLICATION
Apply with a roller; product will be tack free within 4 to 5 hours. Temperature for application should be between 50 and 90 degrees Fahrenheit.

CLEAN UP
Clean tools with water immediately after use with Acetone or a
similar solvent

DO’S AND DON’TS
Do not aerate during mixing
Do Cure new concrete 28 days prior to application
Do not apply to floors experiencing moisture drive

TECHNICAL SERVICE
For conditions not specified or application procedures not noted
Contact
RIGHT POINTE COMPANY (888) 755-5700