DESCRIPTION
FORM RELEASE WATER-BASE is a ready to use film forming treatment
that prevents the bonding of fresh concrete mix to forms, tools and equipment. A proprietary high-end chemical emulsion, FORM
RELEASE WATER-BASE combines with the non-reacted lime in the concrete to give a quick, clean stripping of any formwork.
• Interior/Exterior use
• Lengthens form life
• Doesn’t stain or discolor concrete

SPECIFICATIONS
This product meets the maximum VOC content limit (450 g/L) for form release compounds as required by the U.S. EPA Architectural Coatings Rule.

USE AND APPLICATIONS
For use on various types of forms (wood, steel, fiberglass, aluminum). Treat and season forms prior to each use with brush, roller or hand sprayer (maximum setting at 25-30 psi with fan type tip). Avoid excess run-off or ponding by only applying a thin coat of FORM RELEASE WATER-BASE.
Soap and water will clean application equipment

FEATURES AND BENEFITS
• Minimizes stripping time
• Provides a clean cast on pre-cast products
• Inhibits concrete buildup on equipment
• Can be painted over

Coverage Rates

PACKAGING
• 5 gallon pails
• 55 gallon drums
• 275 gallon Tote

WARNING
PROTECT FROM FREEZING
DO NOT DILUTE
See MSDS for further information

TECHNICAL SERVICE
For conditions not specified, application procedures not noted,
contact: Right Pointe Company (888) 755-5700

LIMITED WARRANTY
Every reasonable effort is made to apply RIGHT POINTE COMPANY
exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, RIGHT POINTE COMPANY MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and RIGHT POINTE COMPANY shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the RIGHT POINTE COMPANY Technical Manager.