Before application, be sure all voids, cracks and rod holes are repaired with plastic sealer. Surface may be damp but free of oils, dirt or anything that may interfere with the adhesion of this product. It is most important that there is no forecast rain during application. In order for this material to set, the temperature must be 50°F and rising. This material is compatible with most insulation boards. Check with board manufacturer before application. Allow two days cure time before back filling.
PROTECT FROM FREEZING. Keep from open flame. When container
is not in use, be sure cover is securely fastened. If winter storage is necessary, maintain temperature at 50°F or above. Keep stored
material off floor. To insure fresh material, rotate stock.
For conditions not specified, application procedures not noted,
contact: Right Pointe Company (888) 755-5700
Every reasonable effort is made to apply RIGHT POINTE COMPANY
exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, RIGHT POINTE COMPANY MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and RIGHT POINTE COMPANY shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the RIGHT POINTE COMPANY Technical Manager.
|
