DESCRIPTION
Cross Linked Backer Rod-Hot Sealant is a round, flexible, continuous-length, non-absorbent, non-gassing, non-staining, and non-shrinking material extruded from a closed cell polyolefin.
This easy to use material provides the correct sealant reservoir configuration, controls depth and prevents run-out through the bottom of joint as well as bottom side sealant adhesion. With either hot or cold applied sealants, this product works exceptionally well.
• Non-gassing and heat resistant
• Provides correct form and depth for proper joint configurations
• Retains its original diameter
• Will not shrink, melt or emit gas when used with hot or cold applied sealants

SPECIFICATIONS AND SIZE INFORMATION
Conforms to or exceeds the following specifications:
• ASTM-D1622
• ASTM-C 1016
• ASTM-D1623
• ASTM-C 509
• ASTM-D1621
• ASTM-C 336
• ASTM-D5249 Type I

TYPICAL PROPERTIES

USE AND APPLICATION
CROSS LINKED BACKER ROD-HOT is used in large cracks or joints in concrete or asphaltic pavement. It is installed with a smooth blunt instrument that will insert the material without stretching or puncturing it. Hot or cold applied joint sealant applications can follow immediately.
•Roadways
•Parking Lots
•Airport Runways

FEATURES AND BENEFITS
• Works well with concrete or asphaltic surfaces
• Can be used equally well with hot or cold applied joint sealants
• Will not shrink, melt, evaporate or stain
• Retains its original diameter and is non-gassing
• Prevents run-out through voids or bottom of the joint
• Acts as a bond breaker to stop sealant adhesion to the bottom side of the joint

SUGGESTED SIZING USEAGE

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe Company (888) 755-5700

LIMITED WARRANTY
Every reasonable effort is made to apply RIGHT POINTE COMPANY exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, RIGHT POINTE COMPANY MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and RIGHT POINTE COMPANY shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the RIGHT POINTE COMPANY Technical Manager.