DESCRIPTION
CORK-STANDARD Expansion Joint filler is composed of clean, granulated cork, bonded together securely with a phenolic resin.
CORK-STANDARD is highly resilient, will compress without extrusion and has a recovery rate of 95% or more of the original thickness.
• Meets or exceeds all specifications
• Resilient - recovers 95% of original thickness after compression
• Heat molded under pressure to desired thickness
• Resists water infiltration

SPECIFICATIONS AND SIZE INFORMATION
Conforms to or meets the following specifications:
• ASTM D 1752, Type II
• AASHTO M 153, Type II
• FAA Specification item P-610-2.7
• Corps of Engineers CRD-C 509, Type II
• Federal Specification HH-F-341 F, Type II, Class B
• NAVY BY&D: 4 YF item1-05, YF item 2-14, 46YA item 2-04(2)
• ANSI A37.114, Type II

THICKNESS:
• 1/4”
• 3/8”
• 1/8”
•3/4”
• 1”

STANDARD LENGTHS:
• 5’
•10’

SLAB WIDTH:
• 36”

CUT TO SIZE:
• 2” to 36” in 1” increments

USE AND APPLICATIONS
Cork-Standard Expansion Joint is designed for use in a number of commercial and industrial applications. It is particularly suited for use where it is imperative that joints be kept sealed at all times.
• Flood Walls
• Sewage Treatment Plants
• Spillways
• Filtration Plants

FEATURES AND BENEFITS
Compatible with all hot-pour and cold applied joint sealants
Inert, non-absorbent and rot proof
Completely seals joints at all times
Can be used in isolation joint applications

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe Company (888) 755-5700

LIMITED WARRANTY
Every reasonable effort is made to apply RIGHT POINTE COMPANY exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, RIGHT POINTE COMPANY MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and RIGHT POINTE COMPANY shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the RIGHT POINTE COMPANY Technical Manager.