DESCRIPTION
ALL-PURPOSE ROLL FOAM is a lightweight, polyethylene, closed cell expansion joint filler for use with all cold applied sealants.
This joint filler has a factory pre-set tear strip to provide a consistent reservoir for sealing.  ROLL FOAM is viewed in the marketplace as an affordable expansion joint for all projects, especially small-scale work.
• UV stable; resistant to most chemicals
•  Factory pre-set tear strip
•  Economical alternative to traditional expansion joint materials
•  Cuts easily by hand with a knife
•  Flexible enough to be used around curved structures
•  No staining or “bleed through” concerns, non-gassing

SPECIFICATIONS AND SIZE INFORMATION
Specifications and Size Information
Conforms to or meets the following specifications:
•  ASTM D 1622
•  ASTM D 3575         

Standard Sizes:
• 1/2”
• 3/8”

Packaging:
Available by bale only.

Rolls per bale:

Color:  Dark Grey

Typical Properties
Compression Deflection (PSI)
PSI 25% Compression                 4.19
PSI 50% Compression                 10.48
Compression Set (50%)               24.45

Tensile Strength (PSI)
Machine Direction                       60.46
Cross Direction                          30.20

Elongation (%)
Machine Direction                       60.42
Cross Direction                            56.25

Tear Resistance (PLI)
Machine Direction                    11.78
Cross Direction                        6.37

Durometer
Shore Type A                             15
Shore Type C                             4
Shore Type 00                            51
Cell Size Mode                           1.6 mm
Cell Size Range                          .05-3.0 mm

USE AND APPLICATIONS
Roll Foam is designed to be used on a wide variety of concrete construction projects.  It is best suited for use in expansion, contraction and isolation joint applications.

FEATURES AND BENEFITS
Limits the quantity of sealant required
Sawing and routing operations are unnecessary
Contractor friendly; easy to install
Can be used in both interior/exterior and vertical/horizontal applications
Improves joint performance by acting as a bond breaker

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact:       Right Pointe Company (888) 755-5700

LIMITED WARRANTY
Every reasonable effort is made to apply RIGHT POINTE COMPANY exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use.  We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective.  Satisfactory results depend not only upon quality products, but also upon many factors beyond our control.  Therefore, except for such replacement or refund, RIGHT POINTE COMPANY MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and RIGHT POINTE COMPANY shall have no other liability with respect thereto.  Any claim regarding product defect must be received in writing within one (1) year from the date of shipment.  No claim will be considered without such written notice or after the specified time interval.  User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith.  Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the RIGHT POINTE COMPANY Technical Manager.