Acrylic Concrete Sealer

 

  Acrylic Concrete Sealer
MSDSspacerPDF

 

DESCRIPTION
ACRYLIC CONCRETE SEALER is a resin co-polymer, solvent based
compound that provides a medium-gloss finish when applied to existing concrete surfaces.
Clear drying, non-yellowing, ultraviolet stabilized (for outdoor
applications), ACRYLIC CONCRETE SEALER results in a chemical
resistant, mar-proof film that highlights the underlying concrete, exposed aggregate, or pool deck surface. Meets maximum VOC
content limit (350g/L).
• Reduces floor maintenance expenditures
• Fast drying-tack free within 2 hours
• Multi-coat application options
• Ready-to-use, requires no mixing

SPECIFICATIONS
• ASTM C-309, Type I, Class B
• AASHTO M-148, Type I, Class B
• ASTM C 1315, Type I, Class A, B, &C

USE AND APPLICATIONS
ACRYLIC CONCRETE SEALER is specifically designed for use on existing concrete surfaces versus freshly finished Thoroughly clean surfaces of all contaminants prior to applying ACRYLIC CONCRETE SEALER.
Roller, low-pressure sprayer or brush are all acceptable methods of application. Do not pond or puddle. Fast drying–restrict foot traffic until tack free (2 hours minimum).
Clean tools immediately with appropriate solvents.
• Industrial/commercial flooring
• Driveways
• Plaza decks
• Pool decks
• Exposed aggregate surfaces

FEATURES AND BENEFITS
• For maximum protection-use ACRYLIC CONCRETE SEALER a minimum of 7 days after the original application of CURE AND SEAL.
• Slows surface degradation process
• Extended service life

Coverage Rates

 
Square Foot Per Gallon
Over previously cure concrete
400-500
First treatment ever
300

PACKAGING
• 5 gallon pails
• 55 gallon drums

 

 
 

RESTRICTIONS
Not to be applied at temperatures below 40°F.
EXTERIOR USE ONLY.
ACRYLIC CONCRETE SEALER will highlight all underlying surface
defects and debris.

WARNING
COMBUSTIBLE MIXTURE.
PROPER VENTILATION IS NECESSARY DURING APPLICATION.
FUMES MAY IRRITATE SKIN, NASAL PASSAGES AND EYES.
Do not use where food items are present.
See MSDS for further information.

TECHNICAL SERVICE
For conditions not specified, application procedures not noted,
contact: Right Pointe Company (888) 755-5700

LIMITED WARRANTY
Every reasonable effort is made to apply RIGHT POINTE COMPANY
exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, RIGHT POINTE COMPANY MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and RIGHT POINTE COMPANY shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the RIGHT POINTE COMPANY Technical Manager.

 

 

 

   

ABOUT US

 

OUR PRODUCTS
Expansion Joints and Plastics
Joint Sealants
Chemical Liquids
Cement Powders and Liquids
Waterproofing
Epoxies

 

CONTACT US

 

FEATURED PRODUCTS

 
© 2011-2014 All Rights Reserved Right Pointe Company