DESCRIPTION
ACRYLIC CONCRETE CURE AND SEAL is a resin co-polymer, solvent based compound that provides a medium-gloss finish when applied to existing concrete surfaces.

Clear drying, non-yellowing, ultraviolet stabilized (for outdoor applications), ACRYLIC CONCRETE CURE AND SEAL results in a chemical resistant, mar-proof film that highlights the underlying concrete, exposed aggregate, or pool deck surface. Meets maximum VOC content limit.

• Non-flammable, ultraviolet stable
• Interior/exterior usage
• Resistant to most common chemicals
SPECIFICATIONS
• ASTM C-309, Type I, Class B
• ASTM C-1315, Type I, Class A
• AASHTO M-148, Type I, Class B

USE AND APPLICATIONS
ACRYLIC CONCRETE CURE AND SEAL should be applied to just-finished concrete (once surface water is gone and it can be walked on without damage). Clean existing concrete surfaces thoroughly of all contaminants.

Roller, low-pressure sprayer or brush are all acceptable methods of application. Do not pond or puddle. DO NOT OVER APPLY. Fast drying–restrict foot traffic until tack free (2-3 hours minimum).

Clean tools immediately with warm soapy water. Once film has dried, use of appropriate solvents may be necessary.

• Industrial/commercial flooring
• Driveways
• Plaza decks
• Pool decks
• Exposed aggregate surfaces

FEATURES AND BENEFITS
•Dustproofs, minimizes checking, crazing and cracking
•Easy, one-part system to apply
•Maximizes the concrete’s compression and
tensile properties

Coverage Rates

Approximate coverage depending on the porosity and texture of concrete, i.e., a broomed surface will require more product than a troweled surface.

PACKAGING
• 5 gallon pails
• 55 gallon drums

RESTRICTIONS:
Do Not Dilute. Not to be applied at temperatures below 40°F. ACRYLIC CONCRETE CURE AND SEAL will highlight all underlying surface defects and debris.

WARNING:
HARMFUL IF SWALLOWED.
FUMES MAY IRRITATE SKIN AND EYES.
See MSDS for further information.

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe Company (888) 755-5700

LIMITED WARRANTY
Every reasonable effort is made to apply RIGHT POINTE COMPANY exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, RIGHT POINTE COMPANY MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and RIGHT POINTE COMPANY shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the RIGHT POINTE COMPANY Technical Manager.